-
USA Lab 50L Dual Set-up Explosion Proof Rotary Evaporator -180°C - 220-240V
USA LabEXRDS-1050$8,899.00The USA Lab 50L rotovap EXRDS Series recovers solvents efficiently and fast with two times the surface are -
50L Boiling / Evaporating Flask for USA Lab 50L RE-1050 Rotary Evaporator
2 reviewsUSA LabRE1050BF$649.00Our 50L Boiling / Evaporating Flask fits our 50L RE-1050 Rotary Evaporator systems. The round bottom boiling flask is constructed with thick walled GG-17 Glass for maximum durability and... -
USA Lab 50L Rotary Evaporator RotoVap RE-1050 (ETL Certification to UL and CSA Standards)
USA LabRE1050-ETL$8,499.00The USA Lab 50L RE Series Rotary Evaporator recovers solvents efficiently and fast. This 50l rotovap unit provides consistent and repeatable results at an -
50L Boiling / Evaporating Screw for USA Lab 50L RE-1050 Rotary Evaporator
3 reviewsUSA LabRE1050BS$89.00Our 50L Boiling / Evaporating lab Screw fits our 50L RE-1050 Rotary Evaporator systems. -
USA Lab 50L Dual Setup Explosion Proof Rotary Evaporator Turnkey System
USA LabEXRDS-1050-VB-TK$24,597.00The USA Lab 50L EXRDS Series Rotary Evaporator Turnkey System recovers solvents efficiently and fast with two times the surface area for condensing and twice t
Description
The USA Lab 50L EXR Series Rotary Evaporator recovers solvents efficiently and fast. Our EXR Series Evaporator feature an explosion proof evaporator with brush-less motors and enclosed internals to prevent any flammable / explosive material from touching the internals via seals.
This 50L rotary evaporator unit provides consistent and repeatable results at an affordable price. With GG-17 High Borosilicate Glass, all pieces have been designed for efficient use of surface area. This means faster recovery without compromising quality. Our evaporators come standard with safety features such as over-temperature shut off and dry-run protection. All valves and ports are high efficiency allowing a continuous feed of material as well as draining the receiving flask without breaking vacuum.
No expense has been spared with these explosion proof evaporators, yet we crush the market on pricing to provide great value at a low cost. Our evaporators are the best value on the market and each one comes with fantastic customer service, local product support and a 1 year warranty.
** Notice **
NOT Compaible With 208V Power Input
(Acceptable range: 219V - 253V)
NOT Compaible With 208V Power Input
(Acceptable range: 219V - 253V)
NOT intended for 24-hour operation, maximum operation time is 16 hours.
|
EXR-1050 SPECIFICATIONS |
|
•Glass Material: GG-17 Borosilicate Glass |
|
•Evaporation Flask Capacity: 50L |
|
•Collection Flask Capacity: 20L |
|
•Rotary Speed: 20-120RPM |
|
•Bath Temperature Range: Room Temp to 180°C /356°F |
|
•Lifting Mechanism: Electric |
|
•Power Requirements: 220-240V 50-60Hz 30A Single Phase |
|
•Temperature Control Accuracy: +/-1°C |
|
•Motor Wattage: 250W |
|
•Heater BTUs: 22,000BTU |
|
•Achievable Vacuum: 399.9Pa |
|
•Evaporating Capability: Water≥7L/H; Alcohol≥15L/H |
|
•Water Bath Volume: 77L (require about 15 gallons) |
|
•Dimensions: 52"L x 30"W x 84"H |
|
•Condensing Surface Area: Main: 0.91㎡ ; Auxiliary: 0.52㎡ |
|
•Speed Regulation: Digital Step-Less |
|
•Vacuum Barb: 13.3MM |
|
•Condenser Barb: 15.5MM |
|
PACKING LIST |
|
|
USA Lab 50L EXR-1050 Rotary Evaporator Base |
1 set |
|
50L Bath Cover |
1 pc |
|
Main Condenser |
2 pcs |
|
Auxiliary Condenser |
2 pcs |
|
50L Boiling Flask |
1 pc |
|
20L Receiving Flask |
2 pcs |
|
50L Flask Cover |
1 pc |
|
Four-Way Bump Trap |
1 pc |
|
Vapor Duct with Seal (Pre-Installed) |
1 set |
|
PTFE Vacuum Sealing Kit (Pre-Installed) |
1 set |
|
Glass Vacuum Port with PTFE Valve |
6 sets |
|
Glass Feeding Tube with PTFE Valve |
2 sets |
|
PTFE Feeding Tube Extension Hose |
1 pc |
|
Vertical Stand |
2 pcs |
|
Vacuum Gauge |
1 pc |
|
Support Ring |
4 pcs |
|
Rubber Strap for Condenser |
2 pcs |
|
Clamp with PTFE Gasket |
16 sets |
|
Evaporating Flask Screw Aid |
1 pc |
|
Allen Key |
2 pcs |
|
63A Fuse |
1 pc |
|
Screw Nuts for Clamps |
2 pcs |
|
Springs for Clamps |
2 pcs |
|
Gasket for Clamps |
4 sets |
|
Vacuum Hose |
10ft. |
We ship all glassware products with additional care, but sometimes they arrive broken. If glassware arrives broken, please contact us within 3 days of receiving your product and we will either send you a brand new piece or send you a refund! Any glassware broken after delivery voids all warranties. Thank you for understanding!
1 Year parts and labor warranty included. Does not include glassware.
For Technical Support, Questions, or Other Issues Please Email or Call Us!
