Our USA Lab Mixing Tank with stirrer provides superior quality at an affordable price. With a 1/2 HP USA Made Variable Speed Motor you can begin mixing with ease and reliability. Each vessel comes with a 30L 4 kW heater for maximum heat transfer as well as a drain port for easy draining.
Upgrade today with this laboratory mix tank and see the USA Lab difference!
NOT Compaible With 208V Power Input
|
TANK SPECIFICATIONS |
|
•Material: 304 Stainless Steel |
|
•Capacity: 50L |
|
•Lid Size: 6" Tri-Clamp |
|
•Tank PSI Rating: 150psi |
|
•Motor Gasket PSI Rating: 3psi |
|
•Lid Connections: (4 x 1/2" Compression Ports) (1x 6" Tri-Clamp x 3" Tri-Clamp) |
|
•Drain Connection: 1.5" Tri-clamp ( to 1/2" Barb) |
|
•Exterior Dimensions: 19" L x 22" W x 55" H |
|
|
|
HEATER SPECIFICATIONS |
|
•Reservoir Capacity: 30L |
|
•Reservoir Dimensions: 20" x 20" x 24" |
|
•Temperature Range: Room Temperature to 200°C SILICONE OIL ONLY |
|
•Power Requirements: 220-240V 50-60Hz 30A Single Phase 6-30P Plug |
|
•Heating Wattage: 5000W / 22.7A |
|
•Temperature Accuracy: +/- 0.2°C |
|
•Pump Flow: 18.3L/Min |
|
•Total Pump Lift: 6m |
|
•Connection Size: 1/2" MNPT |
|
•Dimensions: 19" x 19" x 24" |
|
•Weight: 68lbs |
|
|
|
STIRRER SPECIFICATIONS |
|
•Horse Power: 0.5 |
|
•Impeller Diameter: 4" (2 included) |
|
•Power Requirements: 110-120V 50-60Hz 15A |
|
•Motor: 1/2 HP, TEFC, IP55 |
|
•RPM: 350-1750 |
|
•Mount Type: 3" Tri-Clamp |
|
•Bearing: SS, Carbon Steel Coupler |
|
•Seal: FDA Lip Seal, Duralast 4331 Seal w/ Duraloy 5163 Case, Max 3PSI Continuous |
|
•Shaft: .625" Diameter x 32" Exposed - 316SS, No Polish |
|
•Impeller: (2) 4" Marine Propeller, 3 Blades, Low Shear, 316SS, Set Screw |
|
PACKING LIST |
|
|
50L Solvent tank (100LB) w/ 12" Bend 1.5" TC |
1pc |
|
6"x3" Hemi Reducer |
1pc |
|
1.5" HP TC |
2pcs |
|
3" HP TC |
3pc |
|
6" HP TC |
1pc |
|
1.5" Buna-N Gasket |
2pcs |
|
3" Buna-N Gasket |
1pc |
|
6" Buna-N Gasket |
1pc |
|
1.5" Sight Glasses w/ Gaskets |
2pcs |
|
RH-30L 30L 200°C Heater |
1pc |
|
RH-30L Hosing - 6ft |
2pcs |
|
1/2 HP USA Made Variable Speed Tri-Clamp Motor |
1pc |
|
32" Rod |
1pc |
|
4" Impellers |
2pcs |
|
1.5" TC x 1/2" Compression |
1pc |
|
USALOK 1/2" MNPT to 1/2" Tube Stub |
2pc |
|
1/2" Compression cap |
1pc |
|
1/2" Superlok Compression Ball Valve |
1pc |
|
1/2" Tube Stub x 1/2" Barb |
1pc |
