The Mixer Direct DP1 line of bench top dispersers is one of the most economical and full featured disperser lines on the market. This high shear disperser can handle a wide range of volumes from 200 mL up to 5 gals. The unique container holder adjusts to clamp the vessels in place frmly at a wide diameter range. One step dispersion blade change out lets the operator quickly tune in a process, using different size dispersion blades or even different blade geometries that better accommodate the shear level needed for the application. The Totally Enclosed Fan Cooled (TEFC) electric motor is IP55 rated for protecting against water spray and dust ingress. The DP1 high speed disperser line does not just perform well with the process, but is also easy to use. They are equipped with an air lift system that effortlessly moves the dispersion blade in and out of the mix. Controls for the DP Series are simple to operate, with an RPM readout to ensure you are getting the same dispersion results every time. All the DP1 electric high shear mixers operate from 0-5000 RPM and can accommodate vessels up to 16” in height.
*10 day lead time, item is subject to drop shipping*
|
Specifications |
|
|
Enclosure Type |
IP55 |
|
Impeller Attachment |
Bolted onto internally threaded shaft |
|
Impeller Material |
316SS |
|
Lead Time |
10 Business Days |
|
Lift Type |
Electric |
|
Motor Type |
TEFC Electric |
|
Phase |
1 Ph. |
|
Shaft Diameter |
.75 in. |
|
Speed Controller |
Variable Frequency Drive (VFD) |
|
Total Height Raised |
41 in. |
|
Volume |
200ml - 5 gal. |
|
Spec Sheets |
|
|
|
|
|
|
|
|
|
|
|
|
|
Our products are guaranteed against defective materials and workmanship. We will repair or replace such items as may prove defective as the situation warrants for the convenience of the customer and economy of MixerDIrect, Inc . Warranty period is one year on items manufactured by MixerDirect, Inc.
On items not manufactured by MixerDirect, Inc, the manufacturer’s warranty applies. All component parts of our products are covered by this warranty, except for normal wear items such as belts, bearings, set screws, etc. We cannot be responsible for damage or abuse to equipment caused by improper installation or operation. Warranties can also be voided by unauthorized disassembly of equipment.
For warranty repairs, equipment is returned to MixerDirect, Inc at the customer’s expense – MixerDirect, Inc will repair/replace and return to customer at the expense of MixerDirect, Inc. This warranty is exclusive and is in lieu of all other warranties, whether expressed or implied. MixerDirect, Inc shall not be liable for any other damages, whether consequential, indirect, or incidental, arising from the sale or use of its products.
