-
-
Superlok Inline Relief Valve, 1/2" O.D. Tube, Angle Pattern, Low Pressure, 300psi, 10 to 250psi adjustable range, 316SS - SS-RL4S8
SuperlokSRVL-S-8-S316$385.00This Superolok adjustable relief valve fitting is a bore through connection, allowing a pipe to pass through the entire fitting. -
Mixer Direct Variable Speed Electric Direct Drive 3 Tri-Clamp Mount Mixer - 3 PSI, 100PSI , 250PSI & Ultimate Vacuum
Mixer DirectTCM-E-$3,296.00 - $5,434.00Lightweight, durable, portable and sanitary - our tri-clamp mixers are utilized across numerous processing industries. They are designed to easily attach to a 3 inch tri-clamp fitting and include an... -
Mixer Direct Variable Speed Air Direct Drive 3" Tri-Clamp Mount Mixer- 3 PSI, 100PSI , 250PSI & Ultimate Vacuum
Mixer DirectTCM-A-$3,548.00 - $5,783.00Lightweight, durable, portable, and sanitary - our tri-clamp mixers are utilized across numerous processing industries. They are designed to easily attach to a 3-inch tri-clamp fitting and include... -
Mixer Direct Variable Speed Explosion Proof Direct Drive 3" Tri-Clamp Mount Mixer - 3 PSI, 100PSI , 250PSI & Ultimate Vacuum
Mixer DirectTCM-EXP-$5,117.00 - $6,461.00Lightweight, durable, portable and sanitary - our tri-clamp mixers are utilized across numerous processing industries. They are designed to easily attach to a 3 inch tri-clamp fitting and include an...
Description
This ASME safety pressure relief valve has a brass body, a 100 psi relief pressure, a 1/4" male NPT threaded inlet connection, and a stainless steel pull ring for manual pressure relief. The valve's brass body, brass valve seat, and the zinc plated steel spring resist corrosion and can be used in operating temperatures up to 250 degrees F. The preset relief pressure is accurate to within +/- 3 percent and a silicon O-ring provides a leak-proof seal to within +/- 10 percent of the relief pressure. This safety valve is American Society of Mechanical Engineers (ASME) safety rated and displays the UV mark for pressure vessel safety valves. It also displays the NB mark for certification in accordance with NB-501, National Board Certification of Pressure Relief Devices. This safety valve has a 116 cubic feet per minute (CFM) flow rate and is suitable for low capacity pressure relief applications such as in home construction air compressors.
Relief valves remove excess pressure or vacuum from a system. The valve openings allow fluids or gases to escape to decrease pressure, and then close once the valve reaches the re-seating pressure limit. They also relieve excess vacuum by opening to release a gas into the system and then closing after it reaches its low-pressure limit. Some relief valves have an adjustment mechanism to set the pressure where the valve opens, making it suitable for various applications. This can be used as a 175 PSI pressure relief valve, and is rated according to the volume of liquid or gas that can flow through them and the material that the valve is constructed from must be suitable for the fluid or gas, which may be corrosive or at an extreme temperature, in which it operates. Relief valves are used in a variety of applications, such as air compressors, petrochemical and chemical manufacturing, natural gas processing, and power generation.
|
Specifications |
|
Material: Brass and SS Spring |
|
Connections: 1/4" MNPT |
|
Ratings: 100PSI,150PSI,175 PSI & 200PSI - 136 CFM Flow Rate - 250°F Max |
|
Weight: 3 oz. |
For Technical Support, Questions, or Other Issues Please Email or Call Us!
