-
Ai UL/CSA Certified 7.5 CF 480°F Vacuum Oven with All SST Tubing
Across InternationalAT75a-ULSale $8,990.00Retail -
AI UL/CSA CERTIFIED 4.8 Cu Ft Forced Air Drying Oven - 250°C 220V Single Phase
Across InternationalFO19140-316LSale $2,890.00Retail -
Ai UL/CSA Certified 16 CF Vacuum Oven w/ 6 Shelves & SST Tubing
Across InternationalAT160-ULSale $15,790.00Retail**PLEASE CALL FOR AVALIBILITY, ITEM MAY DROP SHIP** -
USA Lab 1L Cold Trap Lid
USA LabCTLIDSale $25.00RetailOur 1L Glass Cold Trap Lid is constructed with 3.3 Borosilicate Glass. -
Ai UL/CSA Certified 1.9 CF Vacuum Oven 5 Sided Heat & SST Tubing
Across InternationalSale $2,290.00Retail
Description
**PLEASE CALL FOR AVALIBILITY, ITEM MAY DROP SHIP**
The Ai 2nd Gen -40°C/F T40 cold traps now all ETL certified. They have a much smaller footprint, but at the same time, offering you the same cooling power, 1.5X reservoir and 1.6X trap capacity. New upward hose barb ports provide you safer and easier vacuum tubing connection and removal.
In vacuum applications, a cold trap is a device that condenses all vapors except the permanent gases into a liquid or solid. The most common objective is to prevent vapors being evacuated from an experiment from entering a vacuum pump where they would condense and contaminate it. Particularly large cold traps are necessary when removing large amounts of liquid as in freeze drying.
Pumps that use oil either as their working fluid (diffusion pumps), or as their lubricant (mechanical rotary pumps), are often the sources of contamination in vacuum systems. Placing a cold trap at the mouth of such a pump greatly lowers the risk that oil vapors will back stream into the cavity.
Care should be taken when using a cold trap not to condense liquid oxygen (a light blue liquid) into the cold trap. Liquid oxygen is potentially explosive, and this is especially true if the trap has been used to trap solvent. Liquid oxygen can be condensed into a AI cold trap for vacuum pump if a pump has sucked air through the trap when the trap is very cold.
Ai UL/CSA certified T40-UL -40°C/°F cold trap features
ETL tested to UL certified and CSA certified standards
• 1.5X more reservoir and 1.6X more trap capacity compare to its predecessor
• 1.5X more reservoir and 1.6X more trap capacity compare to its predecessor
• No dry ice or liquid nitrogen needed
• All steel housing for durability
• Small footprint, built-in swivel casters for mobility
• Plug and play, 110-120Volt
SPECIFICATIONS |
|
Model |
T40-UL |
Electrical requirements |
110V, 60Hz 1-PH |
Compressor |
Make: Embraco |
Refrigerant: R404A (220g) |
|
Cooling capacity: |
|
@ -10°C: 300W |
|
@ -20°C: 250W |
|
@ -30°C: 150W |
|
@ -40°C: 50W |
|
Reservoir |
Volume |
1.3 gallon (5 liters) |
|
Dimensions |
|
Diameter 6 1/4 inches |
|
Depth: 9 1/2 inches |
|
Temperature |
-40°C (-40°F) |
Display: digital |
|
Unit: °C |
|
Sensor: Pt100 |
|
Finish |
Exterior: powder coated steel |
Interior: polished type 304 stainless steel |
|
Trap |
Material: high borosilicate glass 3.3 |
Volume: 500ml |
|
Diameter: 2 inches |
|
Depth: 11 1/2 inches |
|
Quantity: three |
|
Vacuum level: lower than 500 Micron |
|
Vacuum connection |
3/8" hose barb |
Recommended coolant |
50% Ethylene glycol + 50% purified water |
Unit/shipping weight |
100lbs / 140lbs |
Unit/shipping dimensions |
13 x 18 x 26" / 18 x 23 x 38" (WxDxH) |
Compliance |
UL 471:2010 Ed.10+R:08Dec2016 |
CSA C22.2#120 Issued: 2013/03/01 Ed: 4 Refrigeration Equipment |
|
Warranty |
One year |
Standard Package |
||
Part Description |
Quantity |
Part Image |
Ai T40-UL -40°C/°F cold trap |
1 pc |
|
Glass trap with upward connection ports |
3 pcs |
|
3/8" silicone vacuum tubing |
10ft |
|
Radiator cleaning brush |
1 pc |
|
3/8" hose barb to KF25 flange adapter |
2 pcs |
|
KF25 quick clamp and centering ring |
2 sets |
|
User's manual |
1 pc |
|
For Technical Support, Questions, or Other Issues Please Email or Call Us!